Full Plastic Fastener Kit for KTM Off-Road Models
The KTM-16SXC17EXC full plastic fastener kit is designed for KTM 2-stroke and 4-stroke off-road motorcycles from 125 cc to 500 cc, providing OEM-style hardware to mount and refresh the complete kit replaces the original plastic mounting hardware with factory-style fasteners and aluminum bushings for a precise fit and reliable retention of all major plastic components, including fenders, fork guards, radiator shrouds, side panels, number plate and seat.
Key product highlights
- Complete bodywork hardware solution for selected KTM SX, SX-F, XC, XC-W and EXC-F models from 2016 onward.
- Includes OEM-match fasteners and bushings for front and rear fenders, fork guards, radiator shrouds, side covers, number plate and seat.
- Factory-style head designs and thread pitches for seamless integration with original mounting points.
- Aluminum bushings and model-specific spacers help protect plastic components from deformation and cracking during installation and use.
- Labeled kit contents for each mounting area to simplify identification and assembly.
- High-quality construction engineered for the demands of motocross, enduro and cross-country riding.
- Designed and manufactured for consistent fitment across multiple KTM displacements in the 125–500 cc range.
Kit contents and construction
The KTM-16SXC17EXC bodywork fastener kit is tailored to replace the primary fasteners used to secure the plastic components on compatible KTM assortment is organized by mounting location so that each area of the motorcycle receives the correct mix of bolts, bushings and spacers.
- Front fender and number plate hardware – factory-style flange head bolts sized to match OEM specifications for secure clamping and clean appearance.
- Radiator shroud hardware – a dedicated selection of screws, flange bolts and spacers to position and support the shrouds without stressing the plastic.
- Rear fender hardware – fasteners and countersunk washers tuned to the rear fender mounting points, maintaining alignment even under vibration.
- Fork guard hardware – shoulder bolts engineered to locate the guards precisely on the fork legs while allowing correct clearance for suspension movement.
- Side panel and seat hardware – a mix of flange bolts and internal Torx bolts that provide reliable anchoring for the side panels and the seat base.
- Aluminum bushings and spacers – application-specific collars and spacers that distribute load around mounting holes and help extend the life of the plastics.
The fasteners are configured to replicate the look and function of the original hardware, supporting quick replacement of worn, corroded or missing bolts while maintaining the intended fit of the plastics.
Typical use cases
This plastic fastener kit is suitable for a range of workshop and race paddock scenarios where consistent, OEM-style hardware is required on KTM off-road motorcycles:
- Installation of new plastic kits after race damage, cosmetic refresh or model restyling.
- Replacement of mismatched or improvised bolts with correctly sized hardware to restore the original fit and finish.
- Race bike preparation where fresh hardware is preferred to avoid time lost to seized or damaged fasteners during service intervals.
- Regular maintenance of enduro and cross-country machines that see frequent plastic removal for cleaning and inspection.
Compatibility
The KTM-16SXC17EXC full plastic fastener kit is configured for selected KTM 2T and 4T off-road motorcycles between 125 cc and 500 table below summarizes typical fitment by brand, model and year.
| Brand | Model | Year |
| KTM | 125 SX | 2016–2018 |
| KTM | 150 SX | 2016–2018 |
| KTM | 150 XC-W | 2017–2019 |
| KTM | 150 XC-W TPI | 2020 |
| KTM | 250 SX | 2017–2018 |
| KTM | 250 SX-F | 2016–2018 |
| KTM | 250 XC-F | 2016–2018 |
| KTM | 250 XCF-W | 2016 |
| KTM | 250 EXC-F | 2017–2019 |
| KTM | 250 XC | 2017–2019 |
| KTM | 250 XC TPI | 2019–2020 |
| KTM | 250 XC-W | 2017–2019 |
| KTM | 250 XC-W TPI | 2019–2020 |
| KTM | 300 XC | 2017–2018 |
| KTM | 300 XC-W | 2017–2019 |
| KTM | 300 XC-W TPI | 2019–2020 |
| KTM | 350 SX-F | 2016–2018 |
| KTM | 350 XC-F | 2016–2018 |
| KTM | 350 XCF-W | 2016 |
| KTM | 350 EXC-F | 2017–2020 |
| KTM | 450 SX-F | 2016–2018 |
| KTM | 450 XC-F | 2016–2018 |
| KTM | 450 XC-W | 2016 |
| KTM | 450 EXC-F | 2017–2019 |
| KTM | 450 EXC-F Six Days | 2017–2019 |
| KTM | 500 XC-W | 2016 |
| KTM | 500 EXC-F | 2017–2020 |
| KTM | 500 EXC-F Six Days | 2020 |
This compatibility information is intended as a general designations and year ranges correspond to typical KTM off-road applications covered by the KTM-16SXC17EXC plastic fastener kit.
